CHOICE OF THE SYSTEM CHARACTERISTICS OF A TURBOCOMPRESSOR UNIT ON THE BASIS OF THE ANALYSIS OF ITS EFFECTIVENESS ACCORDING TO THE RESULTS OF FIELD TESTS. PART II. METHODOLOGICAL APPROACHES TO THE CREATION OF BLOCK-COMPLETE TURBO-COMPRESSOR UNITS FOR COMPRESSOR STATIONS IN THE GAS INDUSTRY

DOI https://doi.org/10.15407/pmach2017.01.003
Journal Journal of Mechanical Engineering – Problemy Mashynobuduvannia
Publisher A. Podgorny Institute for Mechanical Engineering Problems
National Academy of Science of Ukraine
ISSN 0131-2928 (Print), 2411-0779 (Online)
Issue Vol. 20, no. 1, 2017 (March)
Pages 3-11
Cited by J. of Mech. Eng., 2017, vol. 20, no. 1, pp. 3-11

 

Authors

V. P. Parafeinik, Public Joint Stock Company “Sumy Machine-Building Science-and-Production Association” (58, Gorkogo St., Sumy, 40004, Ukraine)

N. S. Shcherbakov, Public Joint Stock Company “Sumy Machine-Building Science-and-Production Association” (58, Gorkogo St., Sumy, 40004, Ukraine)

A. A. Ryabov, Zaporozhye Machine-Building Design Bureau Progress State Enterprise named after Academician A. G. Ivchenko (2, Ivanova Str., 69068, Zaporozhye, Ukraine)

V. V. Shevchuk, Zaporozhye Machine-Building Design Bureau Progress State Enterprise named after Academician A. G. Ivchenko (2, Ivanova Str., 69068, Zaporozhye, Ukraine)

V. N. Raznoshinskiy, Motor Sich Joint-Stock Company (15, Motorostroiteley Ave., Zaporozhye, 69068, Ukraine)

I. N. Tertyshnyy, Public Joint Stock Company “Sumy Machine-Building Science-and-Production Association” (58, Gorkogo St., Sumy, 40004, Ukraine)

S. A. Prilipko, Public Joint Stock Company “Sumy Machine-Building Science-and-Production Association” (58, Gorkogo St., Sumy, 40004, Ukraine)

 

Abstract

This article considers the features of creation of the GPA-Ts-type units and their refinement based on the results of field tests of the GPA-Ts-6.3A/56-1.45-type unit as part of a closed-loop stand. It is shown that this allows obtaining the performance characteristics of the main and auxiliary systems, as well as the system characteristics of the unit.

 

Keywords: closed-loop stand, turbo-compressor unit, centrifugal compressor, gas turbine engine, polytropic compressor efficiency, effective engine efficiency

 

References

  1. Apanasenko, A. I., Krivshich, N. G., & Fedorenko, N. D. (1991). Mounting, Testing and Operation of Modular Turbo-Compressor Packages. Leningrad: Nedra, 361 p.
  2. Parafeynik, V. P. (2009). Scientific Basis of Development of Turbo-Compressor Units with Gas Turbine. Abstract of Doctor Thesis in Engineering Science Spec. 05.05.16. Kharkov, 41 p.
  3. Apanasenko, A. I., Parafeinik, V. P., Kboroshcherko, A. M., Rukhlov, Yu. L., & Sergeev, S. P. (1985). Status for testing GPA-Ts gas compressor units. Testing Benches for Turbo-Compressor Packages of GPA-C type. Chemical and Petroleum Engineering, vol. 21, iss. 6, pp. 288–290. https://doi.org/10.1007/BF01147937
  4. (2003). Centrifugal Compressor. Program and Procedure of Acceptance Tests with Recording Gas Dynamic Characteristics. 177.0000.000-06 PM. Sumy Frunze NPO, VNIIgaz. 17 p.
  5. (2014). API STANDARD 617. Axial and Centrifugal Compressors and Expander-compressors. Eighth Edition, 386 p.
  6. Solokhin, E. L. (1975). Testing of Turbojet Engines. Moscow: Mashinostroeniye, 356 p.
  7. Povkh, I. L. (1974). Aeronautical Experiment in Machine Building. Moscow: Mashinostroeniye, 480 p.

 

Received 19 October 2016

Published 30 March 2017