Determination of the Thermal and Stress-Strain State of the Medium-Pressure Rotor of the T-100/120-130 Turbine after Damage to the Blades

DOI
Journal Journal of Mechanical Engineering – Problemy Mashynobuduvannia
Publisher Anatolii Pidhornyi Institute for Mechanical Engineering Problems
National Academy of Science of Ukraine
ISSN  2709-2984 (Print), 2709-2992 (Online)
Issue Vol. 27, no. 2, 2024 (June)
Pages 6-17
Cited by J. of Mech. Eng., 2024, vol. 27, no. 2, pp. 6-17

 

Authors

Olha Yu. Chernousenko, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” (37, Beresteiskyi ave., Kyiv, 03056, Ukraine), e-mail: chernousenko20a@gmail.com, ORCID: 0000-0002-1427-8068

Vitalii A. Peshko, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” (37, Beresteiskyi ave., Kyiv, 03056, Ukraine), e-mail: vapeshko@gmail.com, ORCID: 0000-0003-0610-1403

Dmytro V. Ryndiuk, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” (37, Beresteiskyi ave., Kyiv, 03056, Ukraine), e-mail: rel_dv@ukr.net, ORCID: 0000-0001-7770-7547

 

Abstract

In the period of shelling of energy facilities of Ukraine by the enemy, emergency damage to the working blades of the rotors and stators of the turbines occurs. Papers related to the determination of the thermal and stress-strain states of power equipment elements, which have a significant impact in the conditions of the CHPP operation after its damage, are quite relevant. The authors determine the thermal and stress-strain states that occur after damage to the medium-pressure rotor (MPR) of the T-100/120-130 power unit of the CHPP under emergency damage conditions. When calculating the thermal and stress-strain states of the MPR, taking into account the technical audit data on damage, a geometric model of the MPR was created, which takes into account all existing emergency damage and changes in the frame compared to the design one. When starting from the cold state of the T-100/120-130 turbine MPR, the maximum intensities of conditional elastic stresses at the moment of time of 16800 s in the zone of the seal groove behind the third non-regulated stage of the MPR are equal to σі=127 MPa, and in the zone of the axial opening – σі=125 MPa. The maximum intensities of conditional elastic stresses at the moment of time of 18000 s in the zone of the seal groove behind the third non-regulated stage of MPR are equal to σі=123 MPa, and in the zone of the axial hole – σі=125 MPa when starting from an uncooled state. The maximum intensities of conditional elastic stresses during start-ups from the hot state of the T-100/120-130 turbine MPR at the moment of time of 6400 s (3000 rpm) in the zone of the first unregulated stage in the seal groove according to the MPR stage are equal to σі=201 MPa, and in zone of the axial opening they are equal to σі=161 MPa. The intensities of conditional elastic stresses at the moment of time of 7000 s (3000 rpm) in the zone of the first unregulated stage in the seal groove according to the degree of MPR σі=168 MPa and in the zone of the axial hole σі=161 MPa also are significant.

 

Keywords: combined heat and power plant, steam turbine, T-100/120-130, medium-pressure cylinder, medium-pressure rotor, power, pressure, temperature, loss, equipment resource, non-stationary thermal conductivity, thermal state, stress-strain state.

 

Full text: Download in PDF

 

References

  1. Chernousenko, O. Yu., Ryndiuk, D. V., & Peshko, V. A. (2020). Otsinka zalyshkovoho resursu ta podovzhennia ekspluatatsii parovykh turbin velykoi potuzhnosti [Estimation of residual life and extension of operation of high-power steam turbines]. Part 3: monograph for scientists and doctors of philosophy in the specialty 144 “Heat Power Engineering”. Kyiv: National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, 297 p. (in Ukrainian).
  2. Mazur, Z., Hernandez-Rossette, A., & Garcia-Illesoas, R. (2006). L-0 blades failure Investigation of a 110 MW geothermal turbine. Proceedings of ASME 2006 Power Conference (May 2–4, 2006, Atlanta, Georgia, USA), pp. 281–289. https://doi.org/10.1115/POWER2006-88024.
  3. Suzuki, T., Matsuura, T., Sakuma, A., Kodama, H., Takagi, K., & Curtis, A. (2005). Recent upgrading and life extension technologies for existing steam turbines. Proceedings of ASME 2005 Power Conference (April 5–7, 2005, Chicago, Illinois, USA), pp. 577–582. https://doi.org/10.1115/PWR2005-50342.
  4. Sanders, W. P. (1988). Turbine steam path engineering for operations and maintenance staff. Canada, Toronto: Turbo-Technic Services Inc.
  5. Chernousenko, O., Usatyi, O., Peshko, V., & Bovsunovsky, A. (2024). Research of the possibility of operating a NPP turbine without a stage of damaged blades. In: Ball, A. D., Ouyang, H., Sinha, J. K., Wang, Z. (eds) Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023). TEPEN IncoME-V DAMAS 2023. Mechanisms and Machine Science, vol. 152. Springer, Cham. https://doi.org/10.1007/978-3-031-49421-5_6.
  6. Chernousenko, O., Butovsky, L., Rindyuk, D., Granovska, O., Moroz, O. (2017). Analysis of residual operational resource of high-temperature elements in power and industrial equipment. Eastern-European Journal of Enterprise Technologies – Еnergy-saving technologies and equipment, vol. 1, no. 8 (85), pp. 20–26. http://dx.doi.org/10.15587/1729-4061.2017.92459.
  7. (2021). Kontrol metalu i prodovzhennia terminu ekspluatatsii osnovnykh elementiv kotliv, turbin i truboprovodiv teplovykh elektrostantsii [Metal control and extension of service life of the main elements of boilers, turbines and pipelines of thermal power plants]. Regulatory document of the Ministry of Fuel and Energy of Ukraine. Typical instruction SOU-N MPE 40.17.401:2021. Kyiv: HRIFRE, Ministry of Fuel and Energy of Ukraine, 214 p. (in Ukrainian).
  8. Shulzhenko, M. H., Hontarovskyi, P. P., Matiukhin, Yu. I., Melezhyk, I. I., & Pozhydaiev, O. V. (2011). Vyznachennia rozrakhunkovoho resursu ta otsinka zhyvuchosti rotoriv i korpusnykh detalei turbin [Determination of estimated resource and evaluation of rotor life and body parts of turbines: Methodological guidelines. Regulatory document SOU-N MEV 0.1–21677681–52:2011: approved by the Ministry of Energy and Coal Mining of Ukraine: effective as of 07.07.11. Kyiv: Ministry of Energy and Coal Mining of Ukraine, 42 p. (in Ukrainian).
  9. Chernousenko, O. Yu., Peshko, V. A., & Usatyi, O. P. (2023). Changes in the thermal and stress-strain state of the HPC rotor of a powerful NPP turbine after the blades damage. Journal of Mechanical Engineering – Problemy Mashynobuduvannia, vol. 26, no. 3, pp. 15–27. https://doi.org/10.15407/pmach2023.03.015 .
  10. Chernousenko, O. Yu. & Peshko, V. A. (2019). Assessment of resource parameters of the extended operation high-pressure rotor of the K-1000-60/3000 turbine. Journal of Mechanical Engineering – Problemy Mashynobuduvannia, vol. 22, no. 4, pp. 41–47. https://doi.org/10.15407/pmach2019.04.041.

 

Received 25 January 2024

Published 30 June 2024