Volume 20, Issue 1, 2017 (March)

Journal of Mechanical Engineering – Problemy Mashynobuduvannia

ISSN: 0131-2928 (Print), 2411-0779 (Online)

Volume 20, Issue 1, 2017 (March)

DOI:   https://doi.org/10.15407/pmach2017.01

 

CONTENTS

 

Subject Categories: Power Engineering
Choice of the system characteristics of a turbocompressor unit on the basis of the analysis
of its effectiveness according to the results of field tests. Part II. Methodological approaches
to the creation of block-complete turbo-compressor units for compressor stations in the gas industry

V. P. Parafeinik, N. S. Shcherbakov, A. A. Ryabov, V. V. Shevchuk, V. N. Raznoshinskiy,
I. N. Tertyshnyy, S. A. Prilipko
3–11
Analysis of modern designs of combined stop-control valves for steam turbines
A. I. Babayev
11–16
Subject Categories: Heat Transfer in Engineering Constructions
 
Analytical solutions and neutral curves of stationary linear Rayleigh problems for cylindrical convective cells with solid and mixed boundary conditions
O. L. Andreyeva, A. O. Kostikov, V. I. Tkachenko
17–22
Determination of heat losses for sections of main heat pipelines using the reference method
O. S. Tsakanyan, V. N. Goloshchapov, S. V. Koshel, N. G. Ganzha
22–27
Subject Categories: Dynamics and Strength of Machines
Probabilistic assessment of the durability of a turbine shaft in the presence of cracks
E. A. Strelnikova, I. G Sirota, A. V. Linnik, L. A. Kalembet, V. N. Zarkhina, O. L. Zaidenvarg
28–35
Investigation of the stress-strain state of fasteners of the flanged connections in hydraulic turbines
V. I. Gnitko, O. F. Polishchuk, A. Yu. Cherkasskiy, N. A. Ilicheva, S. V. Artemova, Ye. S. Kononenko
36–44
Subject Categories: Applied Mathematics
Analytical identification of three-dimensional geometric objects according to the information about the shape of their sections
Yu. S. Litvinova, K. V. Maksymenko-Sheiko, T. I. Sheyko
45–51
Solution to the problem of bending plates by the method of finite elements using 5th degree splines on a triangular grid
O. M. Lytvyn, I. S. Tomanova
52–61
Subject Categories: Non-Traditional Power Engineering
Hydrogen technology of energy storage making use of wind power potential
V. V. Solovey, L. R. Kozak, A. A. Shevchenko, M. M. Zipunnikov, R. Campbell, F. Seamon
62–68
Subject Categories: Ecological Aspects in Mechanical Engineering
Thermal power. Fuel and environmental problems and prospects of development
P. M. Kanilo, A. L. Shubenko
69–77