VOLUME 22, ISSUE 3, 2019 (SEPTEMBER)

Journal of Mechanical Engineering

ISSN: 0131-2928 (Print), 2411-0779 (Online)

Volume 22, Issue 3, September 2019

DOI: https://doi.org/10.15407/pmach2019.03

 

CONTENTS

 

Subject Categories: Aerohydrodynamics and Heat-Mass Exchange
Solution to Non-stationary Inverse Heat Conduction Problems for Multi-layer Bodies, Based on Effective Search for the Regularization Parameter
Yurii M. Matsevytyi, Volodymyr M. Sirenko, Andrii O. Kostikov, Mykola O. Safonov, Valerii V. Hanchyn
PDF

4–13

Numerical Analysis of Working Processes in the Blade Channels of the Highly-Loaded Turbine of a Marine Gas Turbine Engine, Using a Refined Finite Element Model
Serhii O. Morhun
PDF

14–20

Translational Wave Impact on the Operation of the Dniester Pumped Storage Power Plant Upper Reservoir
Oleksandr A. Riabenko, Volodymyr S. Tymoshchuk, Oksana O. Kliukha, Oksana O. Halych, Dmytro M. Poplavskyi
PDF

21–25

Subject Categories: Dynamics and Strength of Machines
 
Chaotic Oscillations of a Kinematically Excited Flat Shell During Geometrically Non-linear Deformation
Konstantin V. Avramov, Kseniya F. Cheshko, Oleg F. Polishchuk
PDF

26–35

Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
Ihor A. Palkov, Mykola H. Shulzhenko
PDF

36–43

Subject Categories: Non-traditional Power Engineering
 
An Analysis of Thermodynamic Characteristics of Metal-Hydride Systems for Hydrogen Storage, Using a Modified Scheme of the Perturbation Theory
Viktor V. Solovei, Andrii M. Avramenko, Kseniia R. Umerenkova
PDF

44–49

Use of a Hydrogen Metal Hydride System to Increase Glass Production Efficiency
Natalia A. Chorna, Oleksandr V. Koshelnik, Olha V. Kruhliakova, Olha V. Dolobovska
PDF

50–56

Subject Categories: High Technology in Mechanical Engineering
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
Oleksandr I. Soshko, Viktor O. Soshko, Igor P. Siminchenko
PDF

57–62

Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
Мark M. Fridman
PDF

63–69