The Choice of a Rational Technology for Manufacturing the Hydrogenerators-Motors Rotor Rim

image_print
DOI https://doi.org/10.15407/pmach2023.04.029
Journal Journal of Mechanical Engineering – Problemy Mashynobuduvannia
Publisher Anatolii Pidhornyi Institute for Mechanical Engineering Problems
National Academy of Science of Ukraine
ISSN  2709-2984 (Print), 2709-2992 (Online)
Issue Vol. 26, no. 4, 2023 (December)
Pages 29-37
Cited by J. of Mech. Eng., 2023, vol. 26, no. 4, pp. 29-37

 

Author

Pavlo M. Makarov, National Aerospace University “Kharkiv Aviation Institute” (17, Chkalov str., Kharkov, 61070, Ukraine), e-mail: p.makarov_khai@gmx.com, ORCID: 0009-0008-6415-8970

 

Abstract

The object of research in the paper is the technology of manufacturing segments of the rotor rim of large hydrogenerators-motors. The subject of study is the design and geometrical state of the rotor rim during the operation of hydraulic units. The goal is to make a three-dimensional mechanical calculation of the rotor segment for the further determination of the most optimal technology for the rotor rim manufacturing. The following tasks are set: to study the peculiarities of the manufacturing technology of the rotor rim segments; to perform an analytical calculation and a three-dimensional calculation with the determination of the average values of stresses and deformations in the rotor segment. The used methods are: finite element method of mathematical modeling of the thermal stress state of nodes. The following results were obtained: a description of the two main manufacturing technologies of the rotor rim segments, namely the stamping method and the laser cutting method, was provided. The advantages and disadvantages of each technological process were analyzed, and it was determined that the laser cutting method should be used in the production of powerful small-scale hydrogenerators. Three-dimensional models of the rotor segment were developed and a three-dimensional mechanical calculation of this model was performed, as a result of which the value of the displacement of the rotor of the hydrogenerator at the nominal frequency of rotation, as well as the average values of the stresses in the spoke and the rim of the rotor, were obtained. Based on the results of calculations, it was established that significant tolerances in the manufacture of rotor segments can lead to changes in the shape of the rotor during its further operation, the appearance of additional vibrations and further affect the performance of the hydraulic unit. The scientific novelty consists in a combined approach to the estimation of the average values of stresses and deformation of the rotor rim, taking into account the technology of its manufacture, which includes elements of analytical mechanical calculation and calculation in a three-dimensional setting.

 

Keywords: rotor rim, stamping, laser cutting, strength calculation.

 

Full text: Download in PDF

 

References

  1. (2017). Enerhetychna stratehiia Ukrainy na period do 2035 roku. Bezpeka, enerhoefektyvnist, konkurentnospromozhnist [Energy strategy of Ukraine for the period up to 2035. Safety, energy efficiency, competitiveness]: Order of the Cabinet of Ministers of Ukraine no. 605 dated August 18, 2017. Kyiv, 66 p. (in Ukrainian). https://zakon.rada.gov.ua/laws/show/605-2017-%D1%80#Text.
  2. (2016). Pro skhvalennia Prohramy rozvytku hidroenerhetyky Ukrainy do 2026 roku [On the approval of the Hydropower Development Program of Ukraine until 2026]: Order of the Cabinet of Ministers of Ukraine dated July 13, 2016 no. 552. Kyiv, 19 p. (in Ukrainian). https://zakon.rada.gov.ua/laws/show/552-2016-%D1%80#Text.
  3. (2021). Informatsiina dovidka pro osnovni pokaznyky rozvytku haluzei PEK Ukrainy za cherven ta 6 misiatsiv 2021 roku [Information certificate on the main indicators of the development of the PEK industries of Ukraine for June and 6 months of 2021]. Kyiv: Ministry of Energy of Ukraine, 10 p. (in Ukrainian). https://www.mev.gov.ua/sites/default/files/field/pdf/%D0%86%D0%BD%D1%84_%D0%B4%D0%BE%D0%B2_%D1%87%D0%B5%D1%80%D0%B2_6%D0%BC%D1%96%D1%81_21_%D0%B7%D0%B2.pdf.
  4. Landau, Yu. A. (2020). Analiz sostoyaniya i perspektivy ispolzovaniya gidroenergeticheskikh resursov pri razvitii obyedinennoy energosistemy (OES) Ukrainy [Analysis of the state and prospects for the use of hydropower resources during the development of the United Energy System (IPS) of Ukraine]. Gidroenergetika Ukrainy – Hydropower of Ukraine, no. 3–4, pp. 16–21 (in Russian).
  5. Mohanta, R., Chelliah, T., Allamsetty, S., Akula, A., & Ghosh, R. (2019). Sources of vibration and their treatment in hydro power stations – A review. Engineering Science and Technology, an International Journal, vol. 20, iss. 2, pp. 637–648. https://doi.org/10.1016/j.jestch.2016.11.004.
  6. Iliev, H. (1999). Failure analysis of hydro-generator thrust bearing. Wear, v225–229, part 2, pp. 913–917. https://doi.org/10.1016/S0043-1648(98)00410-4.
  7. Liu, X., Luo, Y., & Wang, Z. (2016). A review on fatigue damage mechanism in hydro turbines. Renewable and Sustainable Energy Reviews, vol. 54, pp. 1–14. https://doi.org/1016/j.rser.2015.09.025.
  8. Zhang, W., He, Y.-L., Xu, M.-X., Zheng, W.-J., Sun, K., Wang, H.-P., & Gerada, D. (2022). A comprehensive study on stator vibrations in synchronous generators considering both single and combined SAGE cases. International Journal of Electrical Power & Energy Systems, vol. 143, paper 108490. https://doi.org/10.1016/j.ijepes.2022.108490.
  9. Li, J., Chen, D., Liu, G., Gao, X., Miao, K., Li, Y., & Xu, B. (2019). Analysis of the gyroscopic effect on the hydro-turbine generator unit. Mechanical Systems and Signal Processing, vol. 132, pp. 138–152. https://doi.org/10.1016/j.ymssp.2019.06.020.
  10. Valavi, M., Nysveen, A., Nilsen, R., Le Besnerais, J., & Devillers, E. (2017). Analysis of magnetic forces and vibration in a converter-fed synchronous hydrogenator. Proceedings of 2017 IEEE Energy Conversion Congress and Exposition (ECCE), USA, Cincinnati, October, 1–5, 2017, pp. 1838–1844. https://doi.org/10.1109/ECCE.2017.8096018.
  11. Tétreault, A. (2012). Rotor shape vs. rotor field pole shorted turns: Impact on rotor induced vibrations on hydrogenerators. Proceedings of 2012 IEEE International Conference on Condition Monitoring and Diagnosis, Indonesia, Bali, September, 23–27, 2012. P. 133–136. https://doi.org/10.1109/CMD.2012.6416393.
  12. (2022). IEC 60034-33-2022 Rotating electrical machines – Part 33: Synchronous hydrogenerators including motor-generators – Specific requirements: International Standard, 107 p.
  13. Yukhymchuk, V. D. (2014). Tekhnolohiia vyrobnytstva elektrychnykh mashyn [Technology of production of electric machines]: Textbook. Kharkiv: Tim Publishing Group, 750 p. (in Ukrainian).
  14. Wiedemann, Ye. & Kellenberger, W. (1967). Konstruktion elektrischer maschinen [Construction of electrical machines]. New York: Springer – Verlag Berlin (Heidelberg) (in German). https://doi.org/10.1007/978-3-662-12180-1.
  15. (2013). EN 10149-1:2013. Hot rolled flat products made of high yield strength steels for cold forming. General technical delivery conditions: European Standard, 20 p.

 

Received 23 August 2023

Published 30 December 2023