Strength Assessment of the Gas Turbine Engine Fan Disk Based on Its Fracture Toughness Analysis

image_print
DOI
Journal Journal of Mechanical Engineering – Problemy Mashynobuduvannia
Publisher Anatolii Pidhornyi Institute of Power Machines and Systems
of National Academy of Science of Ukraine
ISSN  2709-2984 (Print), 2709-2992 (Online)
Issue Vol. 28, no. 4, 2025 (December)
Pages 26-33
Cited by J. of Mech. Eng., 2025, vol. 28, no. 4, pp. 26-33

 

Authors

Pavlo P. Hontarovskyi, Anatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine (2/10, Komunalnykiv str., Kharkiv, 61046, Ukraine), e-mail: gontarpp@gmail.com, ORCID: 0000-0002-8503-0959

Serhii V. Ugrimov, Anatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine (2/10, Komunalnykiv str., Kharkiv, 61046, Ukraine), e-mail: sugrimov@ipmach.kharkov.ua, ORCID: 0000-0002-0846-4067

Natalia V. Smetankina, Anatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine (2/10, Komunalnykiv str., Kharkiv, 61046, Ukraine), e-mail: nsmetankina@ukr.net, ORCID: 0000-0001-9528-3741

Nataliia H. Garmash, Anatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine (2/10, Komunalnykiv str., Kharkiv, 61046, Ukraine), e-mail: garm.nataly@gmail.com, ORCID: 0000-0002-4890-8152

Iryna I. Melezhyk, Anatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine (2/10, Komunalnykiv str., Kharkiv, 61046, Ukraine), e-mail: melezhyk81@gmail.com, ORCID: 0000-0002-8968-5581

Tetiana V. Protasova, Anatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine (2/10, Komunalnykiv str., Kharkiv, 61046, Ukraine), e-mail: tatyprotasova@gmail.com, ORCID: 0000-0003-1489-2081

 

Abstract

The competitiveness and economic efficiency of aviation gas turbine engines (GTE) are determined by the level of their reliability and resource. One of the most stressed elements of the GTE are disks. It is known that their destruction can lead to an air crash, and structural, technological, operational and other factors can be the cause of this. The specified level of reliability must be ensured throughout the entire engine operation. The evaluation of the crack resistance of the GTE fan disk using an improved method for calculating the development of cracks in structures under cyclic loading, which is based on determining the magnitude of elastic-plastic deformations by the finite element method in the area of the crack tip, is given in the paper. The study was performed for two options of the calculation scheme. In the first one, the disk is considered taking into account the interlocking joints of the blade shanks, which are in contact with the disk teeth. They are modeled by a layer with orthotropic material properties. For the second option of the calculation scheme, the interlocking joints were not included in the model, and the load was applied to the disk rim. In this case, the centrifugal force load from the interlocking joint was taken into account. It was established that the hub of the disk is more stressed than the rim. The nature of the destruction of the GTE disk from the hub and rim sides is different, which is explained by the change in circumferential stresses in the direction of the crack depth. The crack displacement during the destruction of the disk in the rim occurs in the radial direction, and in the hub – in the axial direction. The results of the conducted research will increase the period of reliable operation of aircrafts, reduce the costs and time of their development, and will also contribute to increasing safety in performing civil and combat missions.

 

Keywords: crack resistance, stress-strain state, finite element method, strength, reliability.

 

Full text: Download in PDF

 

References

  1. Masiahin, V. I., Hryhorenko, A. M., Konokh, K. M., & Khakhalkina, O. A. (2021). Vyznachennia faktoriv, yaki znyzhuiut pokaznyky nadiinosti dyskiv HTD ta rozrobka zakhodiv po yikh pidvyshchenniu [Determination of factors that reduce the reliability of GTE disks and development of measures to increase them]. Systemy upravlinnia, navihatsii ta zviazku – Control, Navigation and Communication Systems, vol. 3, no. 65, pp. 50–55 (in Ukrainian). https://doi.org/10.26906/SUNZ.2021.3.050.
  2. Tovkach, S. (2025). Adaptyvni kinematychni struktury do pobudovy konstruktsii aviatsiinoho hazoturbinnoho dvyhuna [Adaptive kinematic structures for building an aircraft gas turbine engine design]. Aviatsiino-kosmichna tekhnika i tekhnolohiia – Aerospace Technic and Technology, no. 4 sup 1, pp. 157–162 (in Ukrainian). https://doi.org/10.32620/aktt.2025.4sup1.20.
  3. Kvasha, Yu. O. & Zinevych, N. A. (2021). Aerodynamichne vdoskonalennia ventyliatora aviatsiinoho hazoturbinnoho dvyhuna [Aerodynamic improvement of the fan of an aircraft gas turbine engine]. Tekhnichna mekhanika – Technical Mechanics, no. 3, pp. 23–29 (in Ukrainian). https://doi.org/10.15407/itm2021.03.023.
  4. Orenes Moreno, B., Bessone, A., Solazzi, S., Vanti, F., Bagnera, F., Riva, A., & Botto, D. (2022). Linear elastic fracture mechanics assessment of a gas turbine vane. Materials, vol. 15, iss. 13, article 4694. https://doi.org/10.3390/ma15134694.
  5. Leonel, E. D. & Venturini, W. S. (2011). Probabilistic fatigue crack growth using BEM and reliability algorithms. Boundary Elements and Other Mesh Reduction Methods XXXIII, vol. 52, pp. 3–14. https://doi.org/10.2495/BE110011.
  6. Hontarovskyi, P. P., Smetankina, N. V., Garmash, N. H., & Melezhyk, I. I. (2020). Analysis of crack growth in the wall of an electrolyser compartment. Journal of Mechanical Engineering – Problemy mashynobuduvannia, vol. 23, no. 4, pp. 38–44. https://doi.org/10.15407/pmach2020.04.038.
  7. Hontarovsky, P. P., Smetankina, N. V., Ugrimov, S. V., Harmash, N. H., & Melezhyk, I. I. (2022). Simulation of the crack resistance of ion-exchange strengthened silicate glass subject to bending strain. International Applied Mechanics, vol. 58, iss. 6, pp. 715–724. https://doi.org/10.1007/s10778-023-01195-0.
  8. (2025). Turbofan Aircraft engines D-18T, Series 3. JSC “Motor Sich”: official website. https://motorsich.com/ukr/products/aircraft/tde/d-18t/.
  9. Characteristics for grade VT3-1. Database of Steel and Alloy [electronic resource]. https://www.splav-kharkov.com/main.php.
  10. Shulzhenko, M. H., Hontarovskyi, P. P., Matiukhin, Yu. I., Melezhyk, I. I., & Pozhydaiev, O. V. (2011). Vyznachennia rozrakhunkovoho resursu ta otsinka zhyvuchosti rotoriv i korpusnykh detalei turbin [Determination of estimated resource and evaluation of rotor life and body parts of turbines]: Methodological guidelines. Regulatory document SOU-N MEV 0.1–21677681–52:2011: approved by the Ministry of Energy and Coal Mining of Ukraine: effective as of 07.07.11. Kyiv: Ministry of Energy and Coal Mining of Ukraine, 42 p. (in Ukrainian).

 

Received 22 November 2025

Accepted 12 December 2025

Published 30 December 2025