Numerical Analysis of the Stress State of Near-Circular Hollow Cylinders Made of Functionally Graded Materials

image_print
DOI https://doi.org/10.15407/pmach2024.02.043
Journal Journal of Mechanical Engineering – Problemy Mashynobuduvannia
Publisher Anatolii Pidhornyi Institute for Mechanical Engineering Problems
National Academy of Science of Ukraine
ISSN  2709-2984 (Print), 2709-2992 (Online)
Issue Vol. 27, no. 2, 2024 (June)
Pages 43-53
Cited by J. of Mech. Eng., 2024, vol. 27, no. 2, pp. 43-53

 

Author

Liliia S. Rozhok, National Transport University (1, M. Omelianovycha-Pavlenka str., Kyiv, 01010, Ukraine), e-mail: teor_mex@ukr.net, ORCID: 0000-0002-7926-9074

 

Abstract

Hollow cylinders of circular cross-section, made of functionally graded materials, are used in many branches of economy as structural elements and parts of machines and units. During manufacturing or in the process of operation of such cylinders, the shape of their cross-sections may differ from the circular one to some extent. A solution of the equilibrium problem of hollow cylinders of non-uniform thickness, which are close to circular ones, in a 3D formulation under certain boundary conditions at the ends is considered in this paper. The cross-sections of the considered cylinders are described using Pascal’s limacon equation. A two-component continuously non-homogeneous material, which elastic properties, characterizing Young’s modulus and Poisson’s ratio, can be determined using concentration of the composition materials along the thickness, was chosen as the cylinder material. The aim of the paper is numerical analysis of the stress state of cylinders of such class depending on the law of variation of elastic properties of their material. The solution of the problem is based on reduction of the original three-dimensional boundary value problem for the system of partial differential equations with variable coefficients to a one-dimensional boundary value problem for a system of ordinary differential equations with constant coefficients of higher order. At the same time, the analytical method of separating variables in two coordinate directions with approximation of functions by discrete Fourier series is used. The one-dimensional boundary value problem is solved by the stable numerical method of discrete orthogonalization. The analysis of the stress state of cylinders depending on the dent size that appear in the neighborhood of the reference surface diameter and the law of variation of the material elastic properties was performed. It is shown that the nonlinearity of the law of the elastic properties distribution along the thickness leads to an increase/decrease of maximum values of normal displacements and longitudinal stresses by 1.3 times compared to the linear law. At the same time, an increase in the dent size leads to an increase of both the displacements and normal stresses by 2-3 times in the zone of the dent maximum dimension compared to the diametrically opposite zone. The results obtained in the paper can be used in strength calculations of structural elements and parts of machines of a similar type.

 

Keywords: discrete Fourier series, stress state, hollow cylinders, 3D elasticity theory, Pascal’s limacon equation, functionally graded materials.

 

Full text: Download in PDF

 

References

  1. Filatov, H. V. (2020). Optimal design of smooth shells both with and without taking into account initial imperfections. Journal of Mechanical Engineering – Problemy Mashynobuduvannia, vol. 23, no. 1, pp. 58–63. https://doi.org/10.15407/pmach2020.01.058.
  2. Filatov, H. V. (2021) Optimal design of single-layered reinforced cylindrical shells. Journal of Mechanical Engineering – Problemy Mashynobuduvannia, vol. 24, no. 1, pp. 58–64. https://doi.org/10.15407/pmach2021.01.058.
  3. Revenko, V. P. (2023). Solutions of three-dimensional problems of the theory of elasticity for orthotropic solids. Journal of Mathematical Sciences, vol. 273, pp. 92–100. https://doi.org/10.1007/s10958-023-06486-y.
  4. Marchuk, A. V., Reneiskaya, S. V., & Leshchuk, O. N. (2020). Three-dimensional analysis of the free vibrations of layered composite plates based on the semianalytic finite-element method. International Applied Mechanics, vol. 56, iss. 4, pp. 481–497. https://doi.org/10.1007/s10778-020-01031-9.
  5. Nguyen-Sy, T., Vu, M. N., Nguyen, T. K., Tran-Le, A.-D., Thai, M.-Q., & Nguyen, T.-T. (2021). Poroelastic response of a functionally graded hollow cylinder under an asymmetric loading condition. Archive of Applied Mechanics, vol. 91, iss. 1, pp. 3171–3189. https://doi.org/10.1007/s00419-021-01958-6.
  6. Zhang, X., He, Y., Li, Z., Yan, R., & Chen, X. (2020). Static and dynamic analysis of cylindrical shell by different kinds of B-spline wavelet finite elements on the interval. Engineering with Computers, vol. 36, iss. 4, pp. 1903–1914. https://doi.org/10.1007/s00366-019-00804-2.
  7. Gholami, R., Darvizeh, A., Ansari, R., & Pourashraf, T. (2018). Analytical treatment of the size-dependent nonlinear postbuckling of functionally graded circular cylindrical micro-/nano-shells. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, vol. 42, iss. 2, pp. 85–97. https://doi.org/10.1007/s40997-017-0080-6.
  8. Najibi, A., Alizadeh, P., & Ghazifard, P. (2021). Transient thermal stress analysis for a short thick hollow FGM cylinder with nonlinear temperature-dependent material properties. Journal of Thermal Analysis and Calorimetry, vol. 146, iss. 5, pp. 1971–1982. https://doi.org/10.1007/s10973-020-10442-2.
  9. Кushnir, R. М. & Zhydyk, U. V. (2019) Temperature stresses in a functionally graded cylindrical shell. Materials Science, vol. 54, iss. 5, pp. 666–677. https://doi.org/10.1007/s11003-019-00231-0.
  10. Grigorenko, A. Ya., Efimova, T. L., & Korotkikh, Yu. A. (2015). Free axisymmetric vibrations of cylindrical shells made of functionally graded materials. International Applied Mechanics, vol. 51, iss. 6, pp. 654–663. https://doi.org/10.1007/s10778-015-0722-6.
  11. Kurpa, L. V., Shmatko, T. V., & Linnik, A. B. (2023). Analysis of stability and vibrations of porous power and sigmoid functionally graded sandwich plates by the R-functions method. Journal of Mechanical Engineering – Problemy Mashynobuduvannia, vol. 26, no. 4, pp. 38–49. https://doi.org/10.15407/pmach2023.04.038.
  12. Fateeva, Yu. & Gristchak, V. Z. (2017). An approximate analytical approach for nonlinear thermodynamic problem of FGM shallow spherical shells with time dependent parameters. Proceeding of the 7th International Conference on Mechanics and Materials in Design (Albufeira, Portugal, June 11–15, 2017), pp. 1109–1110.
  13. Shi, P., Xie, J., & Hao, S. (2021). Static response of functionally graded piezoelectric-piezomagnetic hollow cylinder/spherical shells with axial/spherical symmetry. Journal of Mechanical Science and Technology, vol. 35, iss. 4, pp. 1583–1596. https://doi.org/10.1007/s12206-021-0322-9.
  14. Khorshidi, M. A. & Soltani, D. (2020). Analysis of functionally graded thick-walled cylinders with high order shear deformation theories under non-uniform pressure. SN Applied Sciences, vol. 2, article no. 1362. https://doi.org/10.1007/s42452-020-3179-0.
  15. Salehi, A. & Ahmadi, I. (2022). Transient thermal and mechanical stress analysis of 2D-functionally graded finite cylinder: A Truly Meshless formulation. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, vol. 46, iss. 3, pp. 573–598. https://doi.org/10.1007/s40997-021-00432-6.
  16. Grigorenko, Ya. M., Vasylenko, A. T., & Pankratova, N. D. (1985). Statika anizotropnykh tolstostennykh obolochek [Statics of anisotropic thick-walled shells]. Kyiv: Vyshcha shkola, 190 p. (in Russian).
  17. Grigorenko, Ya. M. & Rozhok, L. S. (2014). Applying discrete Fourier series to solve problems of the stress state of hollow noncircular cylinders. International Applied Mechanics, vol. 50, iss. 2, pp. 105–127. https://doi.org/10.1007/s10778-014-0616-z.
  18. Timoshenko, S. P. & Goodier, J. N. (1951). Theory of elasticity. New York: McGraw-Hill Book Company, 519 p.
  19. Grigorenko, Ya .М. & Rozhok, L. S. (2023). On the equilibrium of nonthin cylindrical shells with a dent. Journal of Mathematical Sciences, vol. 272, no. 2, pp. 80–92. https://doi.org/10.1007/s10958-023-06401-5.

 

Received 29 January 2024

Published 30 June 2024