| DOI | https://doi.org/10.15407/pmach2023.03.028 |
| Journal | Journal of Mechanical Engineering – Problemy Mashynobuduvannia |
| Publisher | Anatolii Pidhornyi Institute for Mechanical Engineering Problems National Academy of Science of Ukraine |
| ISSN | 2709-2984 (Print), 2709-2992 (Online) |
| Issue | Vol. 26, no. 3, 2023 (September) |
| Pages | 28-32 |
| Cited by | J. of Mech. Eng., 2023, vol. 26, no. 3, pp. 28-32 |
Authors
Mykhailo M. Hrebennikov, National Aerospace University “Kharkiv Aviation Institute” (17, Chkalov str., Kharkov, 61070, Ukraine), e-mail: m.grebennikov@khai.edu, ORCID: 0000-0001-7648-3027
Oleksandr H. Dibir, National Aerospace University “Kharkiv Aviation Institute” (17, Chkalov str., Kharkov, 61070, Ukraine), e-mail: ag.dibir@gmail.com, ORCID: 0000-0002-2366-6353
Anatolii O. Kyrpikin, National Aerospace University “Kharkiv Aviation Institute” (17, Chkalov str., Kharkov, 61070, Ukraine), e-mail: anatolkirpikin@gmail.com, ORCID: 0000-0001-8883-0663
Mykola I. Pekelnyi, National Aerospace University “Kharkiv Aviation Institute” (17, Chkalov str., Kharkov, 61070, Ukraine), e-mail: m.pekelny@khai.edu, ORCID: 0000-0003-0989-2546
Abstract
This paper is dedicated to ensuring the strength of cargo equipment elements of transport aircraft. The strength of rollers of roller conveyors, which are made of standard pressed aluminum tubular profiles or composite tubular elements, is considered. The main disadvantage of these semi-finished products is the deviation of the diameter of these standard aluminum profiles, which leads to the emergence of eccentricity Δ between the axes of the outer and inner surfaces. The influence of eccentricity on the change in the values of normal and tangential stresses is considered. This analysis was carried out for standard diameters of tubular profiles at values Δ equal to half of the standard limit deviation of the outer diameter D. Calculations of normal and tangential stresses and their comparison with nominal stresses that occur in the absence of misalignment have been carried out. Calculations were made of the value c of the removal of the center of rigidity from the center of the circle of the outer border of the cross-section at different cross-section sizes of standard profiles with values of Δ equal to half of the standard limit deviation of the outer diameter D inclusively. The calculations showed an increase in tangential stresses τ in some cases by 64% and even by 213%. The obtained results indicate that the presence of Δ≠0 will have a negative effect on the resource of these elements. In order to eliminate the negative consequences, it is necessary to increase the requirements for the shape deviation of the tubular profiles in the input control.
Keywords: cargo equipment of transport aircraft, roller conveyor, tubular profile, misalignment, influence of eccentricity, thin-walled rod, center of cross-sectional rigidity, normal and tangential stresses, shape deviation, resource.
Full text: Download in PDF
References
- Feofanov, A. F. (1958). Stroitelnaya mekhanika tonkostennykh konstruktsiy [Structural mechanics of thin-walled structures]. Moscow: Oborongiz, 331 p. (in Russian).
- Pysarenko, H. S., Kvitka, O. L., & Umanskyi, E. S. (2004). Opir materialiv [Strength of materials]. Kyiv: Vyshcha shkola, 655 p. (in Ukrainian).
- Lizin, V. T. & Pyatkin, V. A. (2003). Proyektirovaniye tonkostennykh konstruktsiy [Design of thin-walled structures]. Moscow: Mashinostroyeniye, 447 p. (in Russian).
- Makeyev, A. I. & Skopintsev, B. I. (1987). Stroitelnaya mekhanika tonkostennykh elementov aviatsionnykh konstruktsiy [Structural mechanics of thin-walled elements of aircraft structures]: A tutorial. Kharkiv: Kharkiv Aviation Institute, 103 p. (in Russian).
- Dibir, O. H. (2020). Budivelna mekhanika aviatsiinykh konstruktsii [Building mechanics of aircraft structures]: A tutorial in 2 parts. Part 2: Rozrakhunok tonkostinnykh stryzhniv [Calculation of thin-walled rods]. Kharkiv: National Aerospace University “Kharkiv Aviation Institute”, 280 p. (in Ukrainian).
- Megson, T. H. G. (2017). Introduction to aircraft structural analysis. UK, Oxford: Butterworth-Heinemann, 758 p.
- Skopintsev, B. I. & Fomichev, P. A. (1983). Raschet tonkostennogo sterzhnya pri izgibe i svobodnom kruchenii. Opredeleniye tsentra zhestkosti secheniya [Calculation of a thin-walled rod in bending and free torsion. Determination of the center of rigidity of the section]: A tutorial. Kharkiv: Kharkiv Aviation Institute, 36 p. (in Russian).
- Dibir, A. G., Kirpikin, A. A., Pekelnyy, N. I. (2017). Issledovaniye polozheniya tsentra zhestkosti v odnozamknutom pryamougolnom sechenii tonkostennogo sterzhnya [Investigation of the position of the center of rigidity in a single-closed rectangular section of a thin-walled rod]. Otkrytyye informatsionnyye i kompyuternyye integrirovannyye tekhnologii – Open information and computer integrated technologies: Collection of scientific papers. Kharkiv: National Aerospace University “Kharkiv Aviation Institute”, iss. 76, pp. 135–140 (in Russian).
- Dibir, A. G., Kirpikin, A. A., Pekelnyy, N. I. (2018). Issledovaniye polozheniya tsentra zhestkosti v odnozamknutom treugolnom sechenii tonkostennogo sterzhnya [Investigation of the position of the center of rigidity in a single-closed triangular section of a thin-walled rod]. Otkrytyye informatsionnyye i kompyuternyye integrirovannyye tekhnologii – Open information and computer integrated technologies: Collection of scientific papers. Kharkiv: National Aerospace University “Kharkiv Aviation Institute”, iss. 80, pp. 134–138 (in Russian).
Received 03 June 2023
Published 30 September 2023